Product List
  • Products-stone crushing lines

Cone Crusher

  • 点击浏览Next                    点击浏览Next

    Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, cone crusher is of stable structure, high efficiency, easy adjustment, economic operation, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing
    chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed
    formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing
    chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
    Working Principle of Cone Crusher:
    Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more
    advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed
    on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing
    bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve
    is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts.
    The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or
    descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined
    adjusted.
    Features of Cone crusher:
    -Big crushing ratio, high efficiency while working;
    -Perfect lubricating device ensures the reliable functions of machine;
    -Wearing parts are of high quality, thus lowering the cost efficiently;
    -Long life and wide usage.
    main technical parameter：

     

    Model Diameter breaking
    (mm)    		 Feed opening
    (mm)    		 Max feed size
    (mm)    		 Range of discharge opening
    (mm)

    Capacity
    (t/h)

    		   Power
    (kw)    		 Speed
    of eccentric shaft
    (r/min)    		 Weight including motor
    (t)    		 Overall dimension
    L×W×H(mm)
    PYB600 Φ600 75 65 12-15 40 30 356 5 2234×1370×1675
    PYD600 Φ600 40 35 3-13 12-23 30 356 5.1 2234×1370×1675
    PYB900 Φ900 135 115 15-50 50-90 55 333 11.2 2692×1640×2350
    PYZ900 Φ900 70 60 5-20 20-65 55 333 11.2 2692×1640×2350
    PYD900 Φ900 50 50 3-13 15-50 55 333 11.3 2692×1640×2350
    PYB1200 Φ900 170 145 20-50 110-168 110 300 24.7 2790×1878×2844
    PYZ1200 Φ900 115 100 8-25 42-135 110 300 25 2790×1878×2844
    PYD1200 Φ1200 60 50 3-15 18-105 110 300 25.3 2790×1878×2844
    PYB1750 Φ1750 250 215 25-50 280-480 160 245 50.3 3910×2894×3809
    PYZ1750 Φ1750 215 185 10-30 115-320 160 245 50.3 3910×2894×3809
    PYD1750 Φ1750 100 85 5-13 75-230 160 245 50.2 3910×2894×3809
    PYB2200 Φ2200 350 300 30-60 59-1000 280/260 220 80 4622×3302×4470
    PYZ2200 Φ2200 275 230 10-30 200-580 280/260 220 80 4622×3302×4470
    PYD2200 Φ2200 130 110 5-15 120-340 280/260 220 81.4 4622×3302×4470

    点击浏览Next
    Technical parameter fluctuation doesn't go another notice
No Data   Combination Crusher