- Products-stone crushing lines
Jaw Crusher
-
Zoneding Jaw Crusher series are based on years’ experience and technology development. The continuous
improvement and refinement has made them the preferred jaw crusher for professionals and our customers. They can
meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the
material is 320MPa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and
chemical industries, etc.Working principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the
eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves. So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving
jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the
final crushed stuff will be discharged from the outlet.Characteristics of Jaw Crusher:
-High crushing ratio
-Even product granularity
-Simple structure
-Wide ranges of choices
-Reliable working condition
-Convenient maintenancemain technical parameter：
Technical parameter fluctuation doesn't go another noticeModel
Feeding inlet size (mm)
Max feeding size(mm)
Discharge size(mm)
Capacity(t/h)
Motor power(kw)
Вес (t)
PE-150
150×250
125
15-45
1.2-3.5
5.5
0.6
PE-250
250×400
210
20-60
5-22
15
2.8
PE-400
400×600
340
40-80
18-60
37
7
PE-500
500×750
425
50-100
43-102
55
10.6
PE-600
600×900
500
65-160
51-180
75
19.2
PE-750
750×1060
630
80-180
80-195
110
29
PE-900
900×1200
780
95-180
140-270
132
51
PE-1000
1000×1200
850
195-280
190-310
132
55
PE-1200
1200×1500
1020
150-300
260-510
160
100.9
PEX-150
150×750
120
18-40
8.5-28
15
3.8
PEX-250 250×750 210 25-60 15-35 30 5.1 PEX-250 250×1000 210 25-60 20-65 37 7 PEX-250 250×1200 210 25-60 25-75 45 8.5 PEX-300 300×1300 250 20-90 30-105 75 11.9
