Brief Introduction:

The heat source of industrial dryer comes from the combustion apparatus and industrial dryer machine adopts concurrent heating method. For this reason, the materials to be dried go into the cylinder from the feeding box or feeding chute and then pushed back by the spiral lifting board. As the dryer machine is obliquely put, the materials flow to the lower end under gravity and the rotation of the cylinder on one hand, and on the other hand, the materials will be repeatedly lifted by the lifting board to upper end and scattered down, so that the materials will form a even material curtain inside the cylinder and carry out sufficient heat exchange with the heat airflow inside the cylinder. As the materials are repeatedly scattered, the water containing in the materials will be gradually dried, thus reaching the goal of drying.

Features:

1.Industrial drying machine is widely used in such industries as fodder, chemistry, medicine and mine.

2.The working process of industrial dryer machine goes like this: the moist materials whose water has been drained go into the dryer machine, under the rotation of the lifting board evenly installed inside the roller drum, the materials will be evenly scattered inside the drying machine and carry out sufficient contact with the hot air, thus accelerating the heat transfer and mass transfer.

3.In the drying process, under the lifting board with a certain inclination and the heat media, the materials will move to the lower end of the dyer machine and be discharged.

4.Industrial dryer for sale is suitable for drying residue materials whose water content is below 85% such as brewer’s grain, bean dregs, guniting corn bran, slurry and pomace, so that it has excellent effect for opening up fodder resources, reducing the feeding cost and reduce environment pollution.